7 Effective Tips To Make The Best Use Of Your Saab 9-3 Key Replacement
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then a new key as well as transponder are required to be purchased and then programmed into the car.
It is an excellent idea to rotate your keys so that one does not get damaged faster than the other. This will also help keep your keys in good condition.
Replacement Case
Contrary to the classic Saab keys of the past keys, the modern key fobs are equipped with electronics which makes it hard to copy. This has made stealing cars much more difficult than it was just a few years ago. It has also made it more expensive to replace lost keys.
Every owner of a 9-3 Saab should have at a minimum two functioning keys. It costs a fortune to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers will typically charge $100-$200 to do this.
There are several ways to get around these costly. Some parts retailers can look up the code from an old key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade from metal for just a fraction of dealer cost. The key must be the exact same as the original for it to work in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver and some patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once the case is open remove all electronics and place them into the new case. Place the key with the correct badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost component that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how to replace the battery for the remote fob in just four simple steps. This tutorial can be used with any modern Saab key fob. However, saab 9-3 key programming thekeylab.co.uk may differ slightly.
The first step is to locate the button that will release the backup key on the fob. This is usually located next to the Saab logo on the back of the fob. Then, use an screwdriver with a flat head to insert into the small hole of this button. This should be enough to open the case so that you can change the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob, and then program it to your car. The entire process should not be more than an hour. It's a simple process that does not require any special equipment.
The process is more complicated if you lose your key, but still possible. The dealer has to first verify the VIN of the vehicle, and then purchase the replacement TWICE module as well as key blade that has the correct unique code. The dealer will then need to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob has an internal battery that is used to lock and unlock your car. The batteries last for a period of and will eventually die. This is a problem that occurs for all vehicles. The good thing is that you can replace the battery on most key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronics already installed, so you can simply open the case and replace those batteries that are old. It's important to note that you will need to take out the emergency key first. you can do this by inserting a small flathead screwdriver into the slot located in the middle of the case. The screwdriver should be moved around the case until it is split open, making it easy to remove.
If you're planning to replace your keys, make sure you have a spare in your possession. This will save you a significant amount of money. If you have a spare you can ask the dealer to cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.
It is possible to add a second key to your vehicle If you don't already have one, but it requires an extensive amount of research and work. It costs around a hundred dollars to add a second car key. The computer in the vehicle must also be programmed. This can be done by a professional, but it is an expensive option for most owners.
Replacement Ignition
The new SAAB 9-3 uses a more sophisticated alarm system based on a key code. If you lose only one key, it can be expensive to add another one since the car must have a specific computer installed and also be programmed to accept a new key. Dealers can charge hundreds of dollars to program the new key in the event that they are unable to complete the task.
Dealers will charge you a high price to replace your car's computer (also called the CIM or SAAB twice) when you lose your only working key. We can reprogram the current EEPROM of your car's computer so that it's ready for an additional key. This will save you more than 50% off the price you'd pay at an auto dealer.
If you have owned a 9-3 from SAAB for a long time, you know that the ignition keys aren't very durable. They can become extremely sticky, and the buttons can be ripped off occasionally and you should think about replacing your ignition key if it isn't performing as it should. It's not as difficult as it appears to replace the ignition key. With the right tools, it can be accomplished quickly.